...
This video contains the following information:
Design Pad General Layout and Feature Location
Creating a New Fire System
New Workspace
Import Excel Configuration
Validation
Create Hardware Interface Files (HWI)
Resulting Window Layout from Import
Network View (6:25)
Ethernet Network Settings
Change Excel Configuration and Re-Import (7:20)
Indication of Pending Changes to Save
Exporting the Configuration to a New Excel File (9:15)
Export Post-Processing In Excel
Changing Configuration to Use Panel Notification Appliance Circuit (NAC) (11:00)
Add NAC to Zone 1 Alarm Output
Setting Wheelock Sync Pattern
Re-import in Design Pad
Communicating With the Panels (13:20)
Select Panel to Communicate With
Use Ethernet or USB / Serial
Set USB Communications Port
Note: The Ethernet and USB micro-B connections are made on the rear of the main screen inside the panel
Panel Firmware Update (14:45)
Note: Firmware files can be found in your Design Pad installation folder or downloaded from our Product Software Repository site
Note: You can set the initial Ethernet IP Address of the panel using the top-left Menu → Diagnostics → Network on the panel screen. This ability is only available on a panel that has not yet been configured
Query Panel Hardware Information (20:40)
Programming Panel With Configuration (21:55)
Other Communication (24:40)
Erase Configuration
Set Date/Time (25:20)
Reboot Panel
Retrieve System Log
Example Imports with Verification Errors (26:25)
Add Two Errors To Configuration
Review Import Errors
Fix Errors and Re-import
...
You can download the Design Pad workspace used in the video here.