...
Access to API sets may be limited based on authentication credentials. The GetCaps command provides a mechanism to determine the capabilities of the current connection.
GetCaps
| Panel |
|---|
|
This command requests a bit field indicating the capabilities of the current connection. The contents may depend on the device type, software version, and rights of the current FANDA user. Additional bits may be defined as new commands and capabilities are added in the future without requiring a change to the protocol version. Clients should simply ignore unsupported bits.
The response is:
| Panel |
|---|
|
HexByteList is a comma-separated list of capability bytes, starting with Byte 0. The client should ignore unknown bytes in the response, and should treat any missing bytes as zero. The currently defined capability flags are (Mask is in the format used by GetCaps and SetCaps):
| Panel | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||
|
The current max-capability response is
| Panel |
|---|
|
SetCaps
| Panel |
|---|
|
This command is intended for internal use. The response is the same as the GetCaps command.
The bytes in HexByteList have the same format as a GetCaps response. The connection's current capabilities are masked with the capabilities given in this command. After this command completes, the connection's capabilities are reduced to the intersection of the two sets.
The FANDA APIs
GetNDL
| Panel |
|---|
|
...
Specifies the reply format of data returned by the GetVar command.
GetCaps
| Panel |
|---|
|
This command requests a bit field indicating the capabilities of the current connection. The contents may depend on the device type, software version, and rights of the current FANDA user. Additional bits may be defined as new commands and capabilities are added in the future without requiring a change to the protocol version. Clients should simply ignore unsupported bits.
...
The current max-capability response is
| Panel |
|---|
|
SetCaps
| Panel |
|---|
|
This command is intended for internal use. The response is the same as the GetCaps command.
...