Page Comparison

{scroll-pagetitle}Ordering Codes{scroll-pagetitle}
h1. Base Ordering Code

The FAC-2100 controller basic root ordering code is:

      *FAC2100-DC28-C*

This describes a unit that accepts DC input power, provides 28V on the axillary power output terminals, uses a standard relay board (reference [Relay Outputs|PDG:Relay Outputs (FAC2100)] for more information), and has circular connectors.


h1. Ordering Options

The controller's relay outputs can be changed from the standard set of mechanical relays to an enhanced mix of solid state and mechanical (again, reference [Relay Outputs|PDG:Relay Outputs (FAC2100)] for more information.)  

To change the installed relay option, append a -R to the end of the root ordering code.  In addition, append three digits where each digit is an 'A' or a 'D'.  The last three digits indicate if relay #2, #3, and #5 (respectively) should be AC (A) or DC (D).

FAC2100-DC28-C-RX{~}2{~}X{~}3{~}X{~}5{~}, where:
* X{~}n{~} is either an 'A' or 'D' and specifies if the output is {*}A{*}C or {*}D{*}C, and 
* n in X{~}n{~} is the solid state relay number.  

For example:
* *FAC2100-DC28-C-RDDA* specifies that there should be DC solid relays for relay #2 and #3 and an AC solid state relay for Relay #5.  
* *FAC-2100-DC28-C-RAAA* specifies that relays #2, #3, and #5 should all be AC solid state.


{scroll-ignore}
[!FA_Inclusion_Library^FAprev.png!|PDG:Parts List (FAC2100)] 
{scroll-ignore}