Page Comparison

...

1. Ensure the NIM-2(s) are configured (IP address loaded, etc.) to be on the same network as the computer that is performing the update.
2. Start Design Pad or Schema Viewer v4.5.230 or higher.
3. Select 'Use Ethernet' from the Communications Menu.

To Update a Single NIM-2:

1. 1. Open the Workspace and HWI associated with the NIM-2 to update.
   2. Choose 'Firmware Update' from the Communications Menu
   3. When prompted, select the NIM2_Release-kernel.4.5.230.bin or NIM2.4.5.230.$cc file
   4. Follow the on-screen instructions to complete the download

To Update Multiple NIM-2s:

1. 1. Open the Workspace associated with the NIM-2 to update.
   2. Right-click on the word 'Workspace' in the Workspace window and select Update Firmware (All Ethernet Hardware) from the Communications sub-menu.
   3. Press the 'Browse' button and select the NIM2_Release-kernel.4.5.230.bin or NIM2.4.5.230.$cc file
   4. Select the NIM-2s to update in the 'Select Ethernet Hardware' window.
   5. Press the 'Upload' button to start the update process.