...
Download link | SHA256 checksum | Description |
| DesignPadG5_Install_v5.1.1207.zip | DesignPadG5_Install_v5.1.1207.txt.asc | Design Pad G5 Install Files |
...
- Design Pad G5
- Schema Viewer G5
- FANDA Tools (SDK, Browser, OPC Server)
- FairNET OPC Server
- Firmware for:
- Chameleon, FACTS-21001
Schema Viewer G5
Download link | SHA256 checksum | Description |
| SchemaViewerG5_Install_v5.1.1207.zip | SchemaViewerG5_Install_v5.1.1207.txt.asc | Schema Viewer G5 Install Files |
...
- As always, customers should ensure the updated software meets their requirements in a test environment prior to deploying in a production environment.
- Power should not be removed during the firmware update process or the device may need to be returned to the factory.If you are upgrading from a release prior to 4.5.264, you must review the release notes for 4.5.264_Patch 2. There are several important considerations when upgrading from pre-4.5.264 releases to release 4.6 that are included in that document..
- [NIM2] See 4.6.41 release notes for information on protected ports if upgrading from a release prior to 4.6.41.
- NIM2/Chameleon firmware update. When initially updating to 4.6.*57*, the NIM2 should be updated first. This will allow the NIM2 to preserve its IP address during the Chameleon firmware update and then allow the rest of the node to be updated over ethernet. After the NIM2 is at level 5.1.1207, the update order does not matter. Also note that Design Pad 5.1.1207 and above are required to support this feature.
INSTALLATION
Installing Design Pad G5
...
- Transfer the G5 Software zip file to the local computer.
- Unzip the file into a temporary folder on the local computer.
- Navigate to the temporary folder and open the 'Design-Pad-Installer' subdirectory.
- Run setup.exe and follow the prompts.
- Design Pad G5 will not function without a valid license.
- Any existing Design Pad G5 or G3 G4 license will work with this patch update.
- If you do not have an existing license then, after installation is complete, follow the on-screen instructions to send the license request to Fairmount Automation. After you receive the license file, copy it into your "\Windows" or "\Program Files\Fairmount Automation\Design Pad G5" or "\Program Files(x86)\Fairmount Automation\Design Pad G5" folder.
...
- Transfer the G5 Software zip file to the local computer.
- Unzip the file into a temporary folder on the local computer.
- Navigate to the temporary folder and open the 'Schema-Viewer-Installer' sub-directory.
- Run setup.exe and follow the prompts.
- Schema Viewer G5 will not function without a valid license.
- Any existing Schema Viewer G5 or G3 G4 license will work with this patch update.
- If you do not have an existing license then, after installation is complete, follow the on-screen instructions to send the license request to Fairmount Automation. After you receive the license file, copy it into your "\Windows" or "\Program Files\Fairmount Automation\Schema Viewer G5" or "\Program Files(x86)\Fairmount Automation\Schema Viewer G5" folder.
Chameleon Installation
IMPORTANT: When updating nodes that contain NIM-2 modules, the NIM-2s should be updated first and then the non-NIM-2 modules. This will ensure that the NIM-2s maintain the needed network settings to perform the update over Ethernet.TS-1 Installation
Updating TS-1 devices:
Ensure the TS-1 is configured (IP address loaded, etc.) to be on the same network as the computer that is performing the update.
...
- Open the Workspace and HWI associated with the NIMTS-2 1 to update.
- Choose 'Firmware Update' from the Communications Menu
- When prompted, select the TS1.5.1.1207.$cc file
- Follow the on-screen instructions to complete the downloadupdate