Operator Menu Location: Generic Hardware Operators -> Analog Outputs

Operator Bitmap:

Functional Description:
This operator provides analog output features with redundant output when used with another analog output.

User-Defined Properties:
Object Name. A string label that identifies the operator

Scale. Input pin

Low Range Scaled Equivalent

High Range Scaled Equivalent.

Sync Sig Name.

Max Difference Before Error. Specifies the amount the signal may vary before an alarm condition exists.

Error Switch Hysteresis Time.
Display Measured Signal Out. This property determines if analog output put pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).
Display Output Active. This property determines if binary output pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).
Display Error Detect Out. This property determines if binary output pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).

Units

Comments: None.

See Also:

Browser not supported