Operator Menu Location: Signal Switching

Operator Bitmap:

Functional Description:
The output of the Multiplexer operator is equal to one of its eight digital inputs. The digital input that is passed through to the output is determined by the state of the three selector inputs, as shown in the table below:

			OUT
LOW	LOW	LOW
LOW	LOW	HIGH
LOW	HIGH	LOW
LOW	HIGH	HIGH
HIGH	LOW	LOW
HIGH	LOW	HIGH
HIGH	HIGH	LOW
HIGH	HIGH	HIGH

In the table, OUT represents the output signal, are the digital input signals, and are the digital selector inputs.

User-Defined Properties:
Object Name. A string label that identifies the operator

Comments: None.

See Also:
Multiplexer (Analog), Demultiplexer (Digital), Demultiplexer (Analog), A/B Switch

Browser not supported