Set Menu

Operator Menu Location: Generic Hardware Operators -> Set Menu

Operator Bitmap:

Functional Description:
These operators allow variables which may be set from a menu to be input to a schema.

User-Defined Properties:
Object Name. A string label that identifies the operator
Display Input: Displays an analog pin for accepting the value's input. This property determines if input pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).
Display Enable Output: Displays a boolean pin for providing the value's output. This property determines if input pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).

Enable On: Choose the timing which defines the enable state above.
Display Value Change: Displays a boolean pin for providing information that the value has been modified. This property determines if output pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).
Display Set Menu Active: Displays a boolean pin for providing information that the value is being modified. This property determines if output pin is visible in the schema diagram. Design Pad issues a warning upon processing the schema when the pin is visible but not connected. The warning message is not issued when the pin is not visible (when this property is not checked).

Initial Output The initial value for this operator

Minimum: The minimum value which may be displayed by this operator

Maximum: The maximum value which may be displayed by this operator

Increment: The amount by which the value may be increased or decreased.

Digits to Display: The number of numerals displayed

Menu Label: A string idetifying the menu item being set

Key Repeat Time: How long the key must be held to indicate the key is repeatedly pushed in milliseconds.

Access Level: Who may change the value - operator, administrator or both.

Update Flash: When should the value be saved for recovery*.

Comments: None.

See Also: