Product Specifications (FAC2100)

Operating Ambient Temperature Range

-20°C to 65°C

Storage/Transport Ambient Temperature Range

-40°C to 85°C

High Impact Shock

MIL-STD-901D, Grade A

Mechanical Vibration

MIL-STD-167B

Electro-Magnetic Interference

MIL-STD-461E

Facial Protection

NEMA 4

Housing Protection

NEMA 4

Voltage Range

18 to 36 VDC

Typical Power Consumption Range*

4 to 10 Watts (not including Aux. DC Output)

Auxiliary Power Output 

28 VDC, +/-1%

200mA Maximum

Quantity / Resolution

2 Channels / 14 Bits

Current Output Ranges Supported

0-20mA, 4-20mA

Current Output Range Accuracy

+/-40uA at 25°C, +/-100uA Over Temperature

Voltage Output Ranges Supported

0-10V, 0-5V

Voltage Output Range Accuracy

+/-40mV at 25°C, +/-100mV Over Temperature

Quantity / Resolution

3 Channels / 16 Bits

Current Input Ranges Supported

0-20mA, 4-20mA

Current Input Accuracy

+/-40uA at 25°C, +/-100uA Over Temperature

Standard Voltage Input Ranges Supported

0-20V, 0-10V, 0-5V, 1-5V, 0-2.5V

Standard Voltage Input Range Accuracy

+/-36mV at 25°C, +/-86mV Over Temperature

Low Voltage Input Ranges Supported

0-1V, 0-500mV, 0-250mV, 0-100mV

Low Voltage Input Range Accuracy

+/-2mV at 25°C, +/-5mV Over Temperature

Resistance Input Range Supported

0-2400Ω

Resistance Input Range Accuracy

+/-2.4 or +/-0.4% of Reading (whichever is smaller) Over Temperature

RTD Support

3 Wire, 100Ω Platinum (European or American curve), 120Ω Nickel, or Custom

RTD Accuracy

+/- 1°C Over Temperature

Quantity / Type

8 Channels / Opto-isolated

Maximum Allowable Continuous Input Voltage

200 VDC or 140 VAC RMS

Maximum Allowable Voltage Spike

1000V peak 1.2µS x 50µS pulse per MIL-STD-1399 Section 300

Logic High Voltage Range

5-200 VDC or 24-130 VAC 55-500 Hz

Minimum Input Duration for Logic High Detection

4 ms

Logic Low Voltage Range

0-1 VDC or 0-0.5 VAC 55-500 Hz

Minimum Input Duration For Logic Low Detection

56 ms

Minimum Input Current Required (AC and DC inputs)

5mA RMS

Quantity / Type

2 Channels / Opto-isolated

Input Signal Support

5VDC, 28VDC (at approximately 7mA)

Single-Input Operating Modes

on/off (i.e., switch), pulse counter, frequency counter

Dual-Input Operating Modes

event timer, quadrature decoder

Maximum Frequency

500 KHz

Quantity / Type

2 Channels / Opto-isolated Transistor

Output Signal Support

Up to 28VDC (40mA maximum)

Operating Modes

on/off, variable frequency square-wave, pulse width modulation (PWM)

Maximum Frequency

50 Hz

Quantity / Type

5 Relays Maximum / Up to 4 Mechanical Form “C” Relays and up to 3 Opto-isolated Solid State Form “A” Relays

Mechanical Relay Rated Signal Range

4 A (resistive) @ 24VDC or 120 VAC, 2 A (resistive) @240 VAC

Solid State Relay Rated Signal Range

3 A @ 60VDC or 140 VAC

Element Type

Yellow, Green, and Red LEDs

Digital Readouts

Two 4 digit, 7 segment digital readouts
One 3 digit, 7 segment digital readout
Colors are user-specified
0.4" in height
0.3" in width

Analog Bar Graphs

Two columns of 40 LEDs (colors are user-specified)
4" in height
0.2" in width
0 to 100% range
2.5% bargraph operation resolution

Alpha-numeric Displays

Three rows with 8 characters (7x5 pixel resolution) each

Keypad

Six positive tactile-feel keys

Point to Point

RS-232 (maximum of 2 devices)

Multi-drop

RS-485 and RS-422

Less then 5 seconds

Design Pad graphical programming environment on a PC using Windows XP or better — Compiled programs are typically transferred from a PC's COMM port to the controller via RS-232 serial link

Outputs and user-specified properties are adjusted using a six-button keypad

Front

5.5" x 8"

Depth (w/o cylindrical connector shells)

7.75"

Approximately 7 pounds