Product Specifications
Environmental Characteristics | |
|---|---|
Operating Ambient Temperature Range | -20°C to 65°C |
Storage/Transport Ambient Temperature Range | -40°C to 85°C |
High Impact Shock | MIL-STD-901D, Grade A |
Mechanical Vibration | MIL-STD-167B |
Electro-Magnetic Interference | MIL-STD-461E |
Facial Protection | NEMA 4 |
Housing Protection | NEMA 4 |
...
*Reference the Electrical Installation Power section for more information.
Analog Outputs | |
|---|---|
Quantity / Resolution | 2 Channels / 14 Bits |
Current Output Ranges Supported | 0-20mA, 4-20mA |
Current Output Range Accuracy | +/-40uA at 25°C, +/-100uA Over Temperature |
Voltage Output Ranges Supported | 0-10V, 0-5V |
Voltage Output Range Accuracy | +/-40mV at 25°C, +/-100mV Over Temperature |
Analog Inputs | |
|---|---|
Quantity / Resolution | 3 Channels / 16 Bits |
Current Input Ranges Supported | 0-20mA, 4-20mA |
Current Input Accuracy | +/-40uA at 25°C, +/-100uA Over Temperature |
Standard Voltage Input Ranges Supported | 0-20V, 0-10V, 0-5V, 1-5V, 0-2.5V |
Standard Voltage Input Range Accuracy | +/-36mV at 25°C, +/-86mV Over Temperature |
Low Voltage Input Ranges Supported | 0-1V, 0-500mV, 0-250mV, 0-100mV |
Low Voltage Input Range Accuracy | +/-2mV at 25°C, +/-5mV Over Temperature |
Resistance Input Range Supported | 0-2400Ω |
Resistance Input Range Accuracy | +/-2.4 or +/-0.4% of Reading (whichever is smaller) Over Temperature |
RTD Support | 3 Wire, 100Ω Platinum (European or American curve), 120Ω Nickel, or Custom |
RTD Accuracy | +/- 1°C Over Temperature |
Standard Digital Inputs | |
|---|---|
Quantity / Type | 8 Channels / Opto-isolated |
Maximum Allowable Continuous Input Voltage | 200 VDC or 140 VAC RMS |
Maximum Allowable Voltage Spike | 1000V peak 1.2µS x 50µS pulse per MIL-STD-1399 Section 300 |
Logic High Voltage Range | 5-200 VDC or 24-130 VAC 55-500 Hz |
Minimum Input Duration for Logic High Detection | 4 ms |
Logic Low Voltage Range | 0-1 VDC or 0-0.5 VAC 55-500 Hz |
Minimum Input Duration For Logic Low Detection | 56 ms |
Minimum Input Current Required (AC and DC inputs) | 5mA RMS |
Universal Digital Inputs | |
|---|---|
Quantity / Type | 2 Channels / Opto-isolated |
Input Signal Support | 5VDC, 28VDC (at approximately 7mA) |
Single-Input Operating Modes | on/off (i.e., switch), pulse counter, frequency counter |
Dual-Input Operating Modes | event timer, quadrature decoder |
Maximum Frequency | 500 KHz |
...
Reference the Mechanical and Solid State Relay sections for more information.
Displays | |
|---|---|
Element Type | Yellow, Green, and Red LEDs |
Digital Readouts | Two 4 digit, 7 segment digital readouts |
Analog Bar Graphs | Two columns of 40 LEDs (colors are user-specified) |
Alpha-numeric Displays | Three rows with 8 characters (7x5 pixel resolution) each |
Keypad | Six positive tactile-feel keys |
Network Support | |
|---|---|
Point to Point | RS-232 (maximum of 2 devices) |
Multi-drop | RS-485 and RS-422 |
...