Go to the Workspace Network view. Right click on the logical Modbus/TCP network and select Properties (Figure 9.113) to bring up its Configure Network Dialog.
Figure 9.113
The General Info selection shows all the clients and servers on the network (Figure 9.114). The Client Communications Summary selection (Figure 9.115) shows a table of all the defined signals, their source and destination devices, and their unit number, name and address within the unit. It also lists the Modbus and Data types for each signal. The mapping thresholds are listed for mapped values. Finally, the period, or time between data transmissions, is specified in milliseconds.
Figure 9.114. Modules on the Ethernet Network
Figure 9.115. Operators Transmitting Data
