FANDA Tools
- Gary Cane
- Mark Krueger (Unlicensed)
Software Release Notes - 4.5 Patch 2 (v4.5.264)
Introduction
These software release notes describe Release 4.5 Patch 2 of the FANDA Software.
DOWNLOAD LINK
FANDA_v4.5.264.zip (3.66 MB)
Note: This file is included in the Design Pad and/or Schema Viewer v4.5.2xx installation. It can be found in \Program Files\Fairmount Automation\<PROGRAM NAME> folder (where <PROGRAM NAME> is 'Design Pad G4' or 'Schema Viewer G4').
Release Date
April 24, 2012
Download Contents
This file includes the following software items:
FANDA Browser
FANDA OPC Server
FANDA Software Development Kit (SDK) – FANDASDK.dll, FANDASDK.h, and FANDASDK.lib
Note: These files are included in the Design Pad and/or Schema Viewer v4.5.2xx installation. They can be found in \Program Files\Fairmount Automation\<PROGRAM NAME> folder (where <PROGRAM NAME> is 'Design Pad G4' or 'Schema Viewer G4').
File Signatures
File Name |
File Size |
File Date/Time |
|---|---|---|
FandaBrowser.exe |
109 KB |
04/24/2012 3:35PM |
FandaOPCServer.exe |
123 KB |
04/24/2012 3:35PM |
FANDASDK.dll |
188 KB |
04/24/2012 3:35PM |
FANDASDK.h |
36 KB |
04/24/2012 3:35PM |
FANDASDK.lib |
10 KB |
04/24/2012 3:35PM |
libeay32.dll |
1,017 KB |
04/24/2012 3:35PM |
NDIErrors.dll |
44 KB |
04/24/2012 3:35PM |
NDIServer.dll |
444 KB |
04/24/2012 3:35PM |
wodKeys64.dll |
858 KB |
04/24/2012 3:35PM |
wodKeys.dll |
705 KB |
04/24/2012 3:35PM |
wodSSH64.dll |
1,042 KB |
04/24/2012 3:35PM |
wodSSH.dll |
848 KB |
04/24/2012 3:35PM |
wodSSHD.dll |
1,152 KB |
04/24/2012 3:35PM |
XCrashReport.exe |
124 KB |
04/24/2012 3:35PM |
XCrashReport.ini |
1 KB |
04/24/2012 3:35PM |
xerces-c_3_1.dll |
1,844 KB |
04/24/2012 3:35PM |
MANUAL INSTALLATION INSTRUCTIONS
It is recommended that these files be installed as part of the Design Pad installation to ensure all required external software dependencies are installed. To use the referenced zip file above (assuming all needed dependencies are already installed), unzip all the files into the same folder and execute the desired '.exe'.
Special Considerations
- As always, customers should ensure the updated software meets their requirements in a test environment prior to deploying in a production environment.
Manual Registration of the FANDA OPC Server
The FANDA OPC Server must be registered with the operating system for OPC Clients to access it. This process is typically automatically completed during the Design Pad installation. To perform a manual registry (required when you manually install the FANDA software or manually move the installation location), perform the following steps:
- Open a command prompt window (From the Start Menu, choose Run and type 'cmd')
- Navigate to the folder containing the FANDAOPCServer.exe file (use the 'cd' command)
- Type 'FANDAOPCServer.exe -RegServer'
- Type 'Exit' to close the command prompt window