Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Wiki Markup
{scroll-pagetitle}Relay Outputs{scroll-pagetitle}
h1. Relays
The FAC-2100 can be ordered with a Standard or Enhanced Relay Board.  


h1. Standard Relay Board
The Standard Relay Board contains four Form-C mechanical relays.  This is the default ordering option and does not require any additional order codes post-pended to the model number. 


h1. Enhanced Relay Board
The Enhanced Relay Board contains three Form-A solid state relays and two Form-C mechanical relays.  To order a FAC-2100 with the Enhanced Relay Board, post-pend the model number with '-RX{~}2{~}X{~}3{~}X{~}5{~}', where:
* X{~}n{~} is either an 'A' or 'D' and specifies if the output is {*}A{*}C or {*}D{*}C, and 
* n in X{~}n{~} is the solid state relay number.  

The most common option is '-RAAA' for an Enhanced Relay Board with three AC solid state relays.

Solid state relays offer near zero volt turn-on and near zero current turn-off.  This feature makes them ideal options for applications that need to switch inductive loads such as a solenoid or motor.  
{page-break}
h1. Mechanical Relay Wiring

{scroll-align-center} !Installation - Relay (non-inductive).png!
{*}Typical Relay Output Wiring for a Non-Inductive Load Using the Standard Relay Board{*}{scroll-align-center}

{page-break}
h1. Solid State Relay Wiring
{scroll-align-center}!Installation - Relay (DC inductive).png!
{*}Typical Relay Output Wiring for a 24 Volt DC Inductive Load using the Enhanced Relay Board and a DC Solid-State Relay{*}{scroll-align-center}

\\
{page-break}
{scroll-align-center}!Installation - Relay (AC inductive).png!
{*}Typical Relay Output Wiring for an AC Inductive Load Using the Enhanced Relay Board and an AC Solid-State Relay{*}{scroll-align-center}


\\
{page-break}
{scroll-ignore}
[!FA_Inclusion_Library^FAprev.png!|PDG:Digital Outputs (FAC2100)] [!FA_Inclusion_Library^FAnext.png|PDG:align=right!|Networking (FAC2100)]
{scroll-ignore}