Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Unknown macro: {scroll-pagetitle}

Relay Outputs

Relays

The FAC-2100 can be ordered with a Standard or Enhanced Relay Board.

Standard Relay Board

The Standard Relay Board contains four Form-C mechanical relays. This is the default ordering option and does not require any additional order codes post-pended to the model number.

Enhanced Relay Board

The Enhanced Relay Board contains three Form-A solid state relays and two Form-C mechanical relays. To order a FAC-2100 with the Enhanced Relay Board, post-pend the model number with '-RX2X3X5', where:

  • Xn is either an 'A' or 'D' and specifies if the output is AC or DC, and
  • n in Xn is the solid state relay number.

The most common option is '-RAAA' for an Enhanced Relay Board with three AC solid state relays.

Solid state relays offer near zero volt turn-on and near zero current turn-off. This feature makes them ideal options for applications that need to switch inductive loads such as a solenoid or motor.

Unknown macro: {page-break}

Mechanical Relay Wiring

Unknown macro: {scroll-align-center}


Typical Relay Output Wiring for a Non-Inductive Load Using the Standard Relay Board

Solid State Relay Wiring

Unknown macro: {scroll-align-center}


Typical Relay Output Wiring for a 24 Volt DC Inductive Load using the Enhanced Relay Board and a DC Solid-State Relay


Unknown macro: {page-break}
Unknown macro: {scroll-align-center}


Typical Relay Output Wiring for an AC Inductive Load Using the Enhanced Relay Board and an AC Solid-State Relay


Unknown macro: {scroll-ignore}

[!FA_Inclusion_Library^FAprev.png!] null

  • No labels