Product Specifications
Environmental Characteristics |
|
---|---|
Operating Ambient Temperature Range |
-20°C to 65°C |
Storage/Transport Ambient Temperature Range |
-40°C to 85°C |
High Impact Shock |
MIL-STD-901D, Grade A |
Mechanical Vibration |
MIL-STD-167B |
Electro-Magnetic Interference |
MIL-STD-461E |
Facial Protection |
NEMA 4 |
Housing Protection |
NEMA 4 |
Input Power |
|
---|---|
Voltage Range |
18 to 36 VDC |
Typical Power Consumption Range* |
4 to 10 Watts (not including Aux. DC Output) |
*Reference the Electrical Installation Power section for more information.
Analog Outputs |
|
---|---|
Quantity / Resolution |
2 Channels / 14 Bits |
Current Output Ranges Supported |
0-20mA, 4-20mA |
Current Output Range Accuracy |
+/-40uA at 25°C, +/-100uA Over Temperature |
Voltage Output Ranges Supported |
0-10V, 0-5V |
Voltage Output Range Accuracy |
+/-40mV at 25°C, +/-100mV Over Temperature |
Analog Inputs |
|
---|---|
Quantity / Resolution |
3 Channels / 16 Bits |
Current Input Ranges Supported |
0-20mA, 4-20mA |
Current Input Accuracy |
+/-40uA at 25°C, +/-100uA Over Temperature |
Standard Voltage Input Ranges Supported |
0-20V, 0-10V, 0-5V, 1-5V, 0-2.5V |
Standard Voltage Input Range Accuracy |
+/-36mV at 25°C, +/-86mV Over Temperature |
Low Voltage Input Ranges Supported |
0-1V, 0-500mV, 0-250mV, 0-100mV |
Low Voltage Input Range Accuracy |
+/-2mV at 25°C, +/-5mV Over Temperature |
Resistance Input Range Supported |
0-2400Ω |
Resistance Input Range Accuracy |
+/-2.4 or +/-0.4% of Reading (whichever is smaller) Over Temperature |
RTD Support |
3 Wire, 100Ω Platinum (European or American curve), 120Ω Nickel, or Custom |
RTD Accuracy |
+/- 1°C Over Temperature |
Standard Digital Inputs |
|
---|---|
Quantity / Type |
8 Channels / Opto-isolated |
Maximum Allowable Continuous Input Voltage |
200 VDC or 140 VAC RMS |
Maximum Allowable Voltage Spike |
1000V peak 1.2µS x 50µS pulse per MIL-STD-1399 Section 300 |
Logic High Voltage Range |
5-200 VDC or 24-130 VAC 55-500 Hz |
Minimum Input Duration for Logic High Detection |
4 ms |
Logic Low Voltage Range |
0-1 VDC or 0-0.5 VAC 55-500 Hz |
Minimum Input Duration For Logic Low Detection |
56 ms |
Minimum Input Current Required (AC and DC inputs) |
5mA RMS |
Universal Digital Inputs |
|
---|---|
Quantity / Type |
2 Channels / Opto-isolated |
Input Signal Support |
5VDC, 28VDC (at approximately 7mA) |
Single-Input Operating Modes |
on/off (i.e., switch), pulse counter, frequency counter |
Dual-Input Operating Modes |
event timer, quadrature decoder |
Maximum Frequency |
500 KHz |
Low Power Digital Outputs |
|
---|---|
Quantity / Type |
2 Channels / Opto-isolated Transistor |
Output Signal Support |
Up to 28VDC (40mA maximum) |
Operating Modes |
on/off, variable frequency square-wave, pulse width modulation (PWM) |
Maximum Frequency |
50 Hz |
High Power Digital Outputs |
|
---|---|
Quantity / Type |
5 Relays Maximum / Up to 4 Mechanical Form “C” Relays and up to 3 Opto-isolated Solid State Form “A” Relays |
Mechanical Relay Rated Signal Range |
4 A (resistive) @ 24VDC or 120 VAC, 2 A (resistive) @240 VAC |
Solid State Relay Rated Signal Range |
3 A @ 60VDC or 140 VAC |
Reference the Mechanical and Solid State Relay sections for more information.
Displays |
|
---|---|
Element Type |
Yellow, Green, and Red LEDs |
Digital Readouts |
Two 4 digit, 7 segment digital readouts |
Analog Bar Graphs |
Two columns of 40 LEDs (colors are user-specified) |
Alpha-numeric Displays |
Three rows with 8 characters (7x5 pixel resolution) each |
Keypad |
Six positive tactile-feel keys |
Network Support |
|
---|---|
Point to Point |
RS-232 (maximum of 2 devices) |
Multi-drop |
RS-485 and RS-422 |
Turn On Time |
---|
Less then 5 seconds |
Programming Method |
---|
Design Pad graphical programming environment on a PC using Windows XP or better — Compiled programs are typically transferred from a PC's COMM port to the controller via RS-232 serial link |
Local Adjustments |
---|
Outputs and user-specified properties are adjusted using a six-button keypad |
Dimensions |
|
---|---|
Front |
5.5" x 8" |
Depth (w/o cylindrical connector shells) |
7.75" |
Weight |
---|
Approximately 7 pounds |