Enable Protocols and Assign NIM-2 to Network
- Gary Cane
Owned by Gary Cane
The NIM-2 module needs to know to use SNMP as its network protocol. Right click on the module and select Module properties as in Figure 9.122. Select the SNMP protocol and check the box to enable that protocol (Figure 9.124).
Figure 9.122. Selecting Module Properties for a NIM-2
Figure 9.124. Enable the SNMP Protocol on the Physical Device
Now switch to the Workspace File view and right click on the NIM-2. Select Assign network (Figure 9.125) and choose the appropriate SNMP logical network from the dropdown in the resulting dialog (Figure 9.126). Check the box next to the desired network name.
Figure 9.125. Assigning the Device to a Specific Logical Network
Figure 9.126. Selecting the Logical Network for Assignment
