Design Pad G4 Operators Reference


Design Pad G4
Operators Reference
Technical Bulletin PDG-TR-2011/13
A supplement to the Fairmount Automation Controllers' Programming Guide













June 2012

NOTICE
This document contains proprietary information of Fairmount Automation, Inc. This document and the information described herein are owned by Fairmount Automation, Inc. and are protected by United States copyright laws and international treaty provisions. The document may not be used (or reproduced for use) to reverse-engineer, develop, or manufacture the software described herein. No part of this document may be photocopied or reproduced without the prior written consent of Fairmount Automation, Inc.
The information contained in this document is subject to change without notice.
Fairmount Automation, Inc. is not obligated to provide updates to this document or the software described herein.
Fairmount Automation, Inc. and its employees specifically disclaim all liabilities and warranties, express and implied (including warranties of merchantability and fitness for a particular purpose), for the accuracy, currency, completeness, and/or reliability of the information contained herein. Fairmount Automation, Inc. and its employees further disclaim all liabilities and warranties, express and implied, for the fitness for any particular use and/or for the performance of any material and/or equipment selected in whole or part with the user of/or in reliance upon information contained herein. Selection of materials and/or equipment is at the sole risk of the user of the publication.
The information herein are provided without warranty of any kind. Any use by you of this information is at your own risk. To the maximum extent permitted by law, Fairmount Automation, Inc. disclaims all warranties of any kind, either express or implied, including, without limitation, implied warranties of merchantability and fitness for a particular purpose.


© 1997-2012 Fairmount Automation, Inc. [June 2012]