Ethernet Port Diagnostics

Operator Menu Location: Generic Hardware Operators → Diagnostics

Operator Bitmap:

Functional Description: The Ethernet Port Diagnostic Generic hardware operator gives various port status information to the schema.  Right-click on this operator to link it to one of the switch ports.

Operator includes pins to provide the following diagnostic information:

• MAC Addr (High) and MAC Addr (Low):  Float output pins for port MAC address (one pin per 3 octets)
• Link Status:  Float output pin for link / Speed Status (No Connection, 10M Full, 10M Half, 100M Full, 100M Half, Port Disabled)
• Unicasts/sec:  Float output pin for Unicast Packets / Sec (combines Tx + Rx)
• Multicasts/sec:  Float output pin for Multicast Packets / Sec (combines Tx + Rx)
• Broadcasts/sec:  Float output pin for Broadcast Packets / Sec (combines Tx + Rx)
• Tx Packets:  Float output pin for Tx Packets (combines Unicast + Multicast + Broadcast)
• Rx Packets:  Float output pin for Rx Packets (combines Unicast + Multicast + Broadcast)
• Tx Errors:  Float output pin for Tx Error Packets
• Rx Errors:  Float output pin for Rx Error Packets
• Fault:  Digital output pin for general fault
• Redun Standby:  Digital output pin for Port In Redundant Standby (for Spanning Tree)