Binary Broadcast
Operator Menu Location: Generic Hardware Operators -> Networking -> Binary
Operator Bitmap:
Functional Description:
This operator sends a binary message defined for the network in the workspace. Each pin matches a field defined in the message format.
User-Defined Properties:
Object Name. A string label that identifies the operator
Enable On If this field is NOT 'Received Message', a binary pin appears and the message is sent when the digital input has the specified value. If the value IS 'Received Message', the broadcaster waits for a specific message to be received before sending its data to the client requesting it. It can alternatively be set to broadcast at each execution cycle.
Minimum Delay for Next Broadcast. The minimum time between broadcasts of the message, which can be multiple controller execution cycles.
Receive Message Trigger Specifies the message which triggers the broadcast when Enable ON is set to Received Message.
Comments: None.
See Also: