Warnings and Notice

Owned by Gary Cane
Last updated: Jun 30, 2014 by Mark Krueger (Unlicensed)


 
WARNING
Do not install, maintain or operate this equipment without reading, understanding and following the proper Fairmount Automation instructions and manuals, otherwise injury or damage may result.
Before performing maintenance on the FAC-2100 controller, be sure to disconnect all power sources (including main power and power signals from analog, digital, communications, and relay connections) and secure the process/system being controlled. Adjusting or removing this product while it is in the system may upset the process being controlled. This process upset may cause injury and/or damage.
This device should be installed, serviced, and maintained by qualified personnel only. Always remove all power sources before installing the device or opening any access panels on the FAC-2100. Failure to do so may result in injury and/or damage.
Ensure all environmental, mechanical, and electrical limits are not exceeded during operation, storage, and transportation of the controller. Failure to do so may result in damage or reduced lifetime of the device. 
 

NOTICE
This document contains proprietary information of Fairmount Automation, Inc. This document and the software described herein are owned by Fairmount Automation, Inc. and are protected by United States copyright laws and international treaty provisions. The document may not be used (or reproduced for use) to reverse-engineer, develop, or manufacture the hardware or software described herein. No part of this document may be photocopied or reproduced without the prior written consent of Fairmount Automation, Inc.
The information contained in this document is subject to change without notice.
Fairmount Automation, Inc. is not obligated to provide updates to this document or the software described herein.
Fairmount Automation, Inc. and its employees specifically disclaim all liabilities and warranties, express and implied (including warranties of merchantability and fitness for a particular purpose), for the accuracy, currency, completeness, and/or reliability of the information contained herein. Fairmount Automation, Inc. and its employees further disclaim all liabilities and warranties, express and implied, for the fitness for any particular use and/or for the performance of any material and/or equipment selected in whole or part with the user of/or in reliance upon information contained herein. Selection of materials and/or equipment is at the sole risk of the user of the publication. 
 

© 2012 Fairmount Automation, Inc.