Controller Accessories (FAC2100)

Owned by Gary Cane
Last updated: Jul 01, 2014 by Mark Krueger (Unlicensed)

Controller Accessories

The following miniature cylindrical connector shells should be used to mate with the FAC-2100's miniature cylindrical box mount connector receptacles:

Miniature cylindrical connector shell part numbers (crimp type)

DescriptionFairmount Automation #Amphenol #MIL-C-26482, Series 1 #
DC Power Connector30090-000PT 06 SE 12-3 S SRMS3126F123S
AC Power Connector30090-001PT 06 SE 12-3 S Y SRMS3126F123SY
COM1 Connector30090-002PT 06 SE 12-10 P SRMS3126F1210P
COM2 Connector30090-003PT 06 SE 10-6 S W SRMS3126F106SW
Analog Input 1 Connector30090-004PT 06 SE 10-6 S SRMS3126F106S
Analog Input 2-3 Connector30090-005PT 06 SE 12-8 S SRMS3126F128S
Analog Output 1 Connector30090-006PT 06 SE 10-6 P W SRMS3126F106PW
Analog Output 2 Connector30090-007PT 06 SE 10-6 P SRMS3126F106P
Digital I/O Connector30090-008PT 06 SE 16-26 S SRMS3126F1626S
Alarms Connector30090-009PT 06 SE 14-12 S SRMS3126F1412S

 

Miniature cylindrical connector shell part numbers (solder type)

DescriptionFairmount Automation #Amphenol #MIL-C-26482, Series 1 #
DC Power Connector30090-020PT 06 E 12-3 S SRMS3116F123S
AC Power Connector30090-021PT 06 E 12-3 S Y SRMS3116F123SY
COM1 Connector30090-022PT 06 E 12-10 P SRMS3116F1210P
COM2 Connector30090-023PT 06 E 10-6 S W SRMS3116F106SW
Analog Input 1 Connector30090-024PT 06 E 10-6 S SRMS3116F106S
Analog Input 2-3 Connector30090-025PT 06 E 12-8 S SRMS3116F128S
Analog Output 1 Connector30090-026PT 06 E 10-6 P W SRMS3116F106PW
Analog Output 2 Connector30090-027PT 06 E 10-6 P SRMS3116F106P
Digital I/O Connector30090-028PT 06 E 16-26 S SRMS3116F1626S
Alarms Connector30090-029PT 06 E 14-12 S SRMS3116F1412S

 

Use the following receptacle caps to cover all unused box mount connectors:

Miniature cylindrical connector receptacle cap part numbers

DescriptionFairmount Automation #Amphenol #Base MS #
Shell Size 10 Protection Cap (ANALOG IN 1, ANALOG OUT 1, ANALOG OUT 2, COM 2)30093-00110-101960-10MS3181-10
Shell Size 12 Protection Cap (DC POWER, AC POWER, COM1, ANALOG IN 2-3)30093-00210-101960-12MS3181-12
Shell Size 14 Protection Cap (ALARMS)30093-00310-101960-14MS3181-14
Shell Size 16 Protection Cap (DIGITAL I/O)30093-00410-101960-16MS3181-16

 

Use the following sealing plugs for unused pins in the miniature cylindrical connector shells:

Miniature cylindrical connector sealing plug part numbers

DescriptionFairmount Automation #Amphenol #MS #
 Contact Size 16 Sealing Plug30093-10110-405996-16MS27488-16
 Contact Size 20 Sealing Plug30093-10210-405996-20MS27488-20


The table below shows the COM 1 to 9 and 25 pin D cable used to export programs from a configuration PC to the controller.

Communication Cable Part Number

DescriptionFairmount Automation #
FAC-2100 COM 1 to 9 and 25 pin D RS-232 Serial Cable (5 ft.)01004-000
*USB to RS-232 Adapter01004-003

*Note: Order both 01004-000 and 01004-003 if USB to FAC-2100 COM 1 connection is needed.

 

The EMI ground braid shown in the following table was used to pass MIL-STD-461 testing and should be installed on the rear grounding stud to a chassis ground point on projects that require resilience to EMI and/or ESD.

EMI Braid Part Number

DescriptionFairmount Automation #
EMI Chassis Grounding Braid30110-015